Specifications
Maximum Connectable Units
Wireless Monitor
UP to 4 ( 1 included in VL-SW251)
Door Station
UP to 2 ( 1 included in VL-SW251)
Monitor
UP to 1 ( 1 included in VL-SW251)
Connectable Devices
Electric Lock Release Support
UP to 2 ( User supplied )
Repeater
UP to 2 ( Repeaters are sold separately )
PBX
Only Panasonic PBX
Convenience
Picture Recording
Up to 50 events / 400 images
Picture Recording
(8 consecutive recorded images each)
Night Vision
Warm white LED lights, Infrared LEDs
Voice Changer
Yes
Intercom call
Between wireless monitors
Intercom call
* Multiple wireless monitors are required
Monitor
Power source
100 - 240 V AC, 50/60 Hz
Power consumption
Standby: Approx. 0.04 A
Power consumption
During operation: Approx. 0.28 A
Dimensions (H x W x D)
Approx. 190 x 165 x 38 mm
Mass (weight)
Approx. 785 g
Operating environment
0 °C to +40 °C, Up to 90 % RH (Relative Humidity) non condensing
Display
Approx. 12.7cm (5-inch), wide colour display
Talking method
Hands-free
Installation method
Wall mount (mounting bracket supplied)
Frequency
2.402 GHz - 2.481 GHz
External material
Flame retardant ABS resin
Door Station
Power source
Supplied by the Main Monitor Station
Dimensions (H x W x D)
Approx. 131 x 99 x 36.5 mm
Mass (weight)
Approx. 200 g
Operating environment
-10 °C to +50 °C, Up to 90 % RH (Relative Humidity) non condensing
Viewing angle
Horizontally: Approx. 87°
Viewing angle
Vertically: Approx. 66°
Installation method
Wall mount (Wall mount base supplied)
Minimum illuminance required
1 lx
Minimum illuminance required
(within approx. 50 cm from the camera lens)
Lighting method
Warm white LED lights, Infrared LEDs
IP rating (INGRESS PROTECTION)
IPX3-rated water resistant
External material
Flame retardant ABS resin
Wireless Monitor
Power source
Ni-MH battery (3.6 V DC / 650 mAh)
Dimensions (H x W x D)
Approx. 157 x 52 x 35 mm
Mass (weight)
Approx. 175 g (including the battery)
Operating environment
0 °C to +40 °C, Up to 90 % RH (Relative Humidity) non condensing
Display
Approx.1.8 inch, colour display
Frequency
2.402 GHz - 2.481 GHz
External material
ABS resin
Charger
Power source
AC adaptor: PQLV219E (220-240 V AC, 50/60Hz)
Dimensions (H x W x D)
Approx. 115 x 76 x 90 mm
Dimensions (H x W x D)
Approx. 105 x 76 x 48 mm (using without the stand)
Mass (weight)
Approx. 115 g (including the stand)
Operating environment
0 °C to +40 °C, Up to 90 % RH (Relative Humidity) non condensing
External material
ABS resin
